Fix the support of the mud pump on a suitable surface to prevent damage from vibrations. If the suction of the device is fine initially but becomes insufficient after some use, it is probably due to internal blockages. The drilling mud pump can be disassembled, and there is usually a lot of impurities inside or some minor wear that needs to be cleaned, and worn parts need to be replaced.
The mud pump should be placed as close to the product as possible to make the oil suction pipe shorter and reduce the number of parts. Do not reduce the pipe size of the electric sprayer mud pump. To extend its service life, the pump should be placed as close as possible to the liquid being pumped. The mud pump parts manufacturer uses a cycloidal pinwheel reducer to drive the pump to reciprocate through the crank slider mechanism, causing the working chamber volume to alternate, and constantly sucking in the liquid. In recent years, due to breakthroughs in the material and process of mud pumps, their service life has been greatly extended. Therefore, they are increasingly replacing some centrifugal pumps and screw pumps in applications that require medium suction in industries including food, chemical, oil, cabin, mining, petrochemical, ceramics, and metallurgy. Although the mud pump has a long service life, it is recommended that users take necessary maintenance measures in daily use, follow the instructions for daily maintenance of the mud pump, and regularly check whether all screws on the mud pump are loose and tighten them in time.
The principle is that the mud pump uses compressed air, nitrogen, or natural gas as power, and the force on the mud pump also affects its motion characteristics. Therefore, a force balance needs to be established within the entire opening range of the mud pump. The mud pump method is only applicable to the selection of pneumatic actuators, and its function mode is formed by the combination of the positive and negative effects of the actuator and valve.
After the pilot valve is activated, a pressure signal is sent to the other end of the main directional air valve. Regardless of the type of mud pump actuator, its output force is an effective force used to overcome the load (mainly referring to the unbalanced force and unbalanced moment plus the effects of friction, sealing, gravity, etc.). Therefore, in order for the mud pump to work properly, the matched actuator needs to generate sufficient output force to overcome various resistances and ensure high sealing and valve opening.
The mud pump is a new type of pump with outstanding comprehensive performance. The mud pump makes the compressed air change direction to the other side of the internal cavity and repeatedly moves back and forth to complete the continuous transportation of the medium. Therefore, a force balance needs to be established within the entire opening range of the micro mud pump to make the compressed air change direction to the other side of the internal cavity and repeatedly move back and forth to complete the continuous transportation of the medium.
Call us on: 
Email Us: 
NO. 1192, Xinhu Street, Dezhou City, Shandong, China 
en
cn 
fr 
de 
es 
it 
ru 
pt 
ar 
vi 
pl 
hu 
